PMI Müfettiş Kontrol Listesi

Taşınabilir XRF pozitif madde tanımlama programları için etkileşimli saha kontrol listesi.

Saha Kontrol Listesi

PMI iş akışınızı adım adım takip edin. İlerleme tarayıcı oturumunuzda kaydedilir.

8 içinden 0 tamamlandı (0%)

Review job pack & specifications

Confirm line list, isometrics, required grades, and acceptance criteria before field work.

Verify calibration & check samples

Run check samples at start of shift. Confirm alloy mode matches job requirements.

Prepare test surface

Remove loose scale, paint, or contamination per site procedure. Note surface condition on report.

Select collimator & geometry

Use appropriate spot size. Maintain consistent distance and angle per manufacturer guidance.

Acquire reading with metadata

Capture GPS, photo, timestamp, and component ID. Test parent metal and welds as required.

Compare to specification

Use Grade ID or element limits. Flag out-of-spec results immediately.

Escalate failures

Quarantine suspect material. Send borderline samples to lab per quality procedure.

Export signed report

PDF with operator ID, instrument serial, and full test log. Archive per project requirements.